High-quality workmanship and classy design - combined in this model
This doorbell convinces by the solid workmanship and the modern design. Like the other models of this doorbell-series, is also this one made of weather-resistant stainless-steel and scratch-proof acrylic glass. But the absolute eyecatcher of this doorbell is the integrated LED-illumination. By this, is your doorbell visible at every time of the day - even at night! You can select your favoured LED-colour during the ordering process.All benefits of this doorbell
- engraving of your desired text with 3D effect
- integrated of your illuminated nameplate
- modern design and solid workmanship
- dust-tight and waterproof LED push-button
Scope of delivery
- doorbell-model "SM_X11080"
- product dimensions, depending on selected option
- detailed wiring instruction
The following options are available for personalisation
- choice of ten possible fonts
- multi-lined engraving possible
- colour-choice of the LED push-button
- select mounting material
Note for installation
The connection be made to conventional bell wires.
You need for installation:
- gong or buzzer
- transformer 6V - 24V
- two separate live wires 6-24V at installation site
- connection also possible at a single live wire
- name plate LED-voltage: 6-12V
Item number: | 4590 |
How many pushbuttons?: | 1 Pushbutton |
Colour: | Black |
: |
Funkklingel Informationen

Kabellose, wetterfeste Edelstahl Funkklingel mit Funk-Sender
In dieser Türklingel sind je nach Anzahl der Klingeltaster ein oder mehrere hochwertige Funksender mit großer Reichweite eingebaut.
So können Sie diese Türklingel nutzen, ohne diese an Klingeldrähte oder sonstige Verkabelungen anzuschließen. Je nach Auswahl werden von uns entsprechende Funk Empfänger mit großer Reichweite (Funkgong) mitgeliefert.
Mit dieser Funkklingel können Sie ohne weiteres Zubehör direkt starten!
Ihre neue Funk-Türklingel ist in wenigen Minuten ohne Verkabelung einsatzbereit. Da die Funkklingel nach dem Schutzstandard IP67 hergestellt wurde, können Sie die Klingel bedenkenlos auch zur Wetterseite hin montieren. Die im Lieferumfang enthaltene A23 Batterie für den Funksender in der T¨rklingel hat eine Lebensdauer von 12-15 Monaten. Nachdem Sie Ihre Funkklingel an der gewünschten Stelle angebracht haben, können Sie sofort loslegen.

Funk-Empfänger für die Steckdose oder batteriebetrieben / Funkgong
Die Inbetriebnahme Ihrer neuen Klingel ist ein Kinderspiel. Montieren Sie die Funkklingel am gewünschten Ort, stecken Sie den/die Funkempfänger in beliebige Steckdosen in Ihrem Zuhause oder nutzen Sie unsere batteriebetriebenen Empfänger für maximale Flexibilität auch auf dem Balkon oder im Garten. Pro Klingeltaster (Sender) können Sie bis zu 6 Empfänger (Steckdose sowie batteriebetrieben) koppeln. Auch können Sie bis zu 6 Klingeltaster an einen Funk-Empfänger anlernen.


Sie haben ein großes Haus oder eine große Wohnung? Schließen Sie bis zu 6 Funk-Empfänger / Funk-Gongs an nur einen einzigen Klingeltaster an.

Mehr als eine Eingangstüre? Koppeln Sie bis zu 6 Klingeltaster an einen Empfänger mit jeweils unterschiedlichen Melodien zur Unterscheidung.
Mounting
Available mounting options for this product:

Dowel plugs
To ensure a permanent and secure connection to your façade, we recommend that you use our fixing set with welded-on hooks on the rear side, into which you can screw the grub screws.
Work steps:- Screw the grub screws into the attached bushes.
- Anchor / mark the holes to be drilled on the facade.
- Drill holes and sink holes.
- Connect bell push button (depending on model)
- Sink the product into the wall with gentle pressure.
Not suitable for WDV / WDVS full-roofed protection facades.

Silicone adhesive
A safe and durable application without drills can be achieved with our Metzler silicone adhesive.
Work steps:- Connect bell push button (depending on model)
- Apply a large amount of silicone adhesive approx. 1 cm from the outer edge of the grease-free, clean side of the article.
- Press the product against the facade / wall and align.
- Fix firmly for approx. 2 hours with suitable material (can be removed without leaving any residue) depending on weather / humidity.

Tension spring for flush-mounted box
If you already have a free flush-mounted box on the façade, we recommend our special stainless steel tension spring for flush-mounted boxes. This allows you to remove the product quickly and easily if necessary.
Work steps:- Connect bell push button (depending on model)
- Press the product with the tension spring into the flush-mounted box.