Modern anthracite house sign with glass element - your street + house number
Discover something new! With the Metzler house number sign with 3D floating effect. An impressive 3D effect is created by a clear special acrylic glass plate set off with stainless steel spacers, which is applied in front of an anthracite grey, satinised base plate.

- High-quality house number sign, manufactured in Germany, individually according to customer requirements.
- Optimally readable due to high contrast of writing to anthracite grey stainless steel base plate.
- Weather resistant due to the use of special acrylic glass and UV direct print with protective lacquer sealing.
Beautify your facade with a modern house number from Metzler
The house number board attracts all attention. The unique combination of stainless steel cover caps, anthracite grey elements and clear acrylic glass is not only impressive at first glance. The question of suitable accessories for the new entrance area arises especially in a new building project. Here the house sign fits perfectly. The elegant appearance is underlined by the floating effect of the glass plate.
Product information in detail
Lettering of street and house number is applied on the back of the acrylic glass plate. Delivery incl. drill holes and complete with suitable fixing material.
Selectable size
- Small: 16 x 11 cm (160 x 110 mm)
- Medium: 21.5 x 15 cm (215 x 150 mm)
- Large: 25 x 17.5 cm (250 x 175 mm)
- XL: 38 x 26.4 cm (380 x 264 mm)
Funkklingel Informationen

Kabellose, wetterfeste Edelstahl Funkklingel mit Funk-Sender
In dieser Türklingel sind je nach Anzahl der Klingeltaster ein oder mehrere hochwertige Funksender mit großer Reichweite eingebaut.
So können Sie diese Türklingel nutzen, ohne diese an Klingeldrähte oder sonstige Verkabelungen anzuschließen. Je nach Auswahl werden von uns entsprechende Funk Empfänger mit großer Reichweite (Funkgong) mitgeliefert.
Mit dieser Funkklingel können Sie ohne weiteres Zubehör direkt starten!
Ihre neue Funk-Türklingel ist in wenigen Minuten ohne Verkabelung einsatzbereit. Da die Funkklingel nach dem Schutzstandard IP67 hergestellt wurde, können Sie die Klingel bedenkenlos auch zur Wetterseite hin montieren. Die im Lieferumfang enthaltene A23 Batterie für den Funksender in der T¨rklingel hat eine Lebensdauer von 12-15 Monaten. Nachdem Sie Ihre Funkklingel an der gewünschten Stelle angebracht haben, können Sie sofort loslegen.

Funk-Empfänger für die Steckdose oder batteriebetrieben / Funkgong
Die Inbetriebnahme Ihrer neuen Klingel ist ein Kinderspiel. Montieren Sie die Funkklingel am gewünschten Ort, stecken Sie den/die Funkempfänger in beliebige Steckdosen in Ihrem Zuhause oder nutzen Sie unsere batteriebetriebenen Empfänger für maximale Flexibilität auch auf dem Balkon oder im Garten. Pro Klingeltaster (Sender) können Sie bis zu 6 Empfänger (Steckdose sowie batteriebetrieben) koppeln. Auch können Sie bis zu 6 Klingeltaster an einen Funk-Empfänger anlernen.


Sie haben ein großes Haus oder eine große Wohnung? Schließen Sie bis zu 6 Funk-Empfänger / Funk-Gongs an nur einen einzigen Klingeltaster an.

Mehr als eine Eingangstüre? Koppeln Sie bis zu 6 Klingeltaster an einen Empfänger mit jeweils unterschiedlichen Melodien zur Unterscheidung.
Mounting
Available mounting options for this product:

Dowel plugs
To ensure a permanent and secure connection to your façade, we recommend that you use our fixing set with welded-on hooks on the rear side, into which you can screw the grub screws.
Work steps:- Screw the grub screws into the attached bushes.
- Anchor / mark the holes to be drilled on the facade.
- Drill holes and sink holes.
- Connect bell push button (depending on model)
- Sink the product into the wall with gentle pressure.
Not suitable for WDV / WDVS full-roofed protection facades.

Silicone adhesive
A safe and durable application without drills can be achieved with our Metzler silicone adhesive.
Work steps:- Connect bell push button (depending on model)
- Apply a large amount of silicone adhesive approx. 1 cm from the outer edge of the grease-free, clean side of the article.
- Press the product against the facade / wall and align.
- Fix firmly for approx. 2 hours with suitable material (can be removed without leaving any residue) depending on weather / humidity.